Toplightstore

Lustre de luxe pour duplex, villas et escaliers de hall d'entrée

20% Off for Your First Order over $100, Code:New20

$1,265.60 USD

Promotion Épuisé

Taxes incluses. Frais d'expédition calculés à l'étape de paiement.

Selected configuration

Couleur de carrosserie: D80CM H120CM
Émission de couleurs: Lumière blanche

View specifications Size & fit guide

Afficher tous les détails

Product overview

A statement chandelier with crystal detailing for tall-space planning. Compare six listed size configurations, then choose White light, Warm light or Three-colour for your selected size.

Size & fit

Dimensions listed for each configuration
Configuration	Diameter	Listed height*
D80 × H120 cm	31.5 in / 80 cm	47.24 in / 120 cm
D100 × H150 cm	39.37 in / 100 cm	59.06 in / 150 cm
D120 × H200 cm	47.24 in / 120 cm	78.74 in / 200 cm
D150 × H230 cm	59.06 in / 150 cm	90.55 in / 230 cm
D180 × H260 cm	70.87 in / 180 cm	102.36 in / 260 cm
D200 × H300 cm	78.74 in / 200 cm	118.11 in / 300 cm

Height is listed in the product configuration. Whether it includes all suspension and mounting components has not been confirmed. Do not use it as the overall installed drop.

Select your size and White light, Warm light or Three-colour option separately. The light options are different configurations; do not assume every option provides three-colour switching.

Will it fit? Plan your space

Use your room measurements to plan how far the light should hang. You can compare the selected light’s dimensions if you have them.

Where are you planning to install the light?

Measure to each step or landing where people pass beneath the light. Use the smallest calculated hanging-length limit. Ask your installer if you are unsure about the clearance to enter.

Planned hanging length: D = H − C

H: ceiling to floor, tabletop or step. C: space below the light. D: ceiling to the bottom of the light.

Measuring guide; not to scale.

Check dimensions and clearance

Measurement units

Ceiling mounting surface to the relevant step or landing

Space to leave below the light

Use the selected unit throughout. Changing units converts your entries.

See a quick calculation example

Calculation example only: 120 in ceiling-to-floor − 96 in entered clearance = 24 in maximum planned drop. These are fictional inputs, not recommended clearance or product dimensions.

Optional: compare measurements from your selected light

Have the selected option’s drawing? Add its measurements below. If not, leave these fields blank and plan your space first.

Full installed hanging length (D), if known — optional

Use the ceiling-to-lowest-point dimension from your selected option’s drawing, in the unit chosen above.

Which length should I enter?

Enter D: the full distance from the ceiling mounting surface to the light’s lowest point—not just the cable, chain or light body.

Single-suspension example. Use the assembled drawing for your selected option; multi-cable and adjustable-ring designs differ. Supplied cable length is not necessarily its installed length.

Generic measuring example only; not this product, not to scale and not an installation drawing.

Optional: check stair opening space

Clear stair opening width — optional

Maximum outside fixture width — optional

Measure between the opening’s inside edges, allowing for projecting railings. Measure the light’s widest span in the same direction.

Space on each side = (opening width − light width) ÷ 2

W: opening width. F: widest light width. g: space on each side when centred.

For a centred light only. Check the other direction and any obstacles separately; for an off-centre light, measure each side. This is not a safety clearance or fit approval.

See a quick calculation example

Example only: A 120 in opening and a 30 in-wide light leave 45 in on each side if centred. This is not an installation safety check or product-fit verdict.

Generic measuring example only; not this product, not to scale and not an installation drawing.

Planning guidance only. Product dimensions and installation requirements need separate confirmation.

Ask about size & options

Specifications

Design & materials

Design & materials
Materials	Metal, Crystal
Available finishes	Gold, Polished

Light source

Light source
Light source	Replaceable Bulb

Article ajouté au panier

Lustre de luxe pour duplex, villas et escaliers de hall d'entrée