Toplightstore

Lustre en cristal doré luxueux à plusieurs étages pour escalier

20% Off for Your First Order over $100, Code:New20

$777.82 USD

Promotion Épuisé

Taxes incluses. Frais d'expédition calculés à l'étape de paiement.

Selected configuration

Couleur de carrosserie: Dia40cm H80cm(15.75"x31.50")
Émission de couleurs: Blanc Froid

View specifications Size & fit guide

Afficher tous les détails

Product overview

A gold-finish chandelier with cascading crystal strands, available in six size configurations. Compare the listed dimensions below, then select Warm White or Cold White for your preferred configuration.

Size & fit

Dimensions listed for each configuration
Configuration	Diameter	Listed height*
D40 × H80 cm	15.75 in / 40 cm	31.5 in / 80 cm
D55 × H100 cm	21.65 in / 55 cm	39.37 in / 100 cm
D80 × H130 cm	31.5 in / 80 cm	51.18 in / 130 cm
D100 × H180 cm	39.37 in / 100 cm	70.87 in / 180 cm
D120 × H200 cm	47.24 in / 120 cm	78.74 in / 200 cm
D150 × H250 cm	59.06 in / 150 cm	98.43 in / 250 cm

Height is listed in the product configuration. Whether it includes all suspension and mounting components has not been confirmed. Do not use it as the overall installed drop.

Select your size and Warm White or Cold White option separately.

Will it fit? Plan your space

Use your room measurements to plan how far the light should hang. You can compare the selected light’s dimensions if you have them.

Where are you planning to install the light?

Measure to each step or landing where people pass beneath the light. Use the smallest calculated hanging-length limit. Ask your installer if you are unsure about the clearance to enter.

Planned hanging length: D = H − C

H: ceiling to floor, tabletop or step. C: space below the light. D: ceiling to the bottom of the light.

Measuring guide; not to scale.

Check dimensions and clearance

Measurement units

Ceiling mounting surface to the relevant step or landing

Space to leave below the light

Use the selected unit throughout. Changing units converts your entries.

See a quick calculation example

Calculation example only: 120 in ceiling-to-floor − 96 in entered clearance = 24 in maximum planned drop. These are fictional inputs, not recommended clearance or product dimensions.

Optional: compare measurements from your selected light

Have the selected option’s drawing? Add its measurements below. If not, leave these fields blank and plan your space first.

Full installed hanging length (D), if known — optional

Use the ceiling-to-lowest-point dimension from your selected option’s drawing, in the unit chosen above.

Which length should I enter?

Enter D: the full distance from the ceiling mounting surface to the light’s lowest point—not just the cable, chain or light body.

Single-suspension example. Use the assembled drawing for your selected option; multi-cable and adjustable-ring designs differ. Supplied cable length is not necessarily its installed length.

Generic measuring example only; not this product, not to scale and not an installation drawing.

Optional: check stair opening space

Clear stair opening width — optional

Maximum outside fixture width — optional

Measure between the opening’s inside edges, allowing for projecting railings. Measure the light’s widest span in the same direction.

Space on each side = (opening width − light width) ÷ 2

W: opening width. F: widest light width. g: space on each side when centred.

For a centred light only. Check the other direction and any obstacles separately; for an off-centre light, measure each side. This is not a safety clearance or fit approval.

See a quick calculation example

Example only: A 120 in opening and a 30 in-wide light leave 45 in on each side if centred. This is not an installation safety check or product-fit verdict.

Generic measuring example only; not this product, not to scale and not an installation drawing.

Planning guidance only. Product dimensions and installation requirements need separate confirmation.

Ask about size & options