Skip to product information
1 of 24

Toplightstore

Shimmering Spiral Gold Crystal Chandelier

Shimmering Spiral Gold Crystal Chandelier

20% Off for Your First Order over $100, Code:New20

Regular price $91.52 USD
Regular price $0.00 USD Sale price $91.52 USD
Sale Sold out
Shipping calculated at checkout.

Selected configuration

Number of lights
3 lights
Emitting color
Warm light
Quantity
View full details

Product overview

Crystal elements descend in a spiral around gold-coloured metalwork.
  • The spiral gives the fixture a vertical, cascading outline.
  • Crystal detailing runs through the descending arrangement.

Size & fit

Will it fit? Plan your space

Use your room measurements to plan how far the light should hang. You can compare the selected light’s dimensions if you have them.

Measure to each step or landing where people pass beneath the light. Use the smallest calculated hanging-length limit. Ask your installer if you are unsure about the clearance to enter.

Measuring hanging height and clearance H: ceiling to floor, tabletop or step. C: space below the light. D: ceiling to the bottom of the light. HDC
Planned hanging length: D = H − C

H: ceiling to floor, tabletop or step. C: space below the light. D: ceiling to the bottom of the light.

Measuring guide; not to scale.

Check dimensions and clearance

Use the selected unit throughout. Changing units converts your entries.

See a quick calculation example

Calculation example only: 120 in ceiling-to-floor − 84 in entered clearance = 36 in maximum planned drop. These are fictional inputs, not recommended clearance or product dimensions.

Optional: compare measurements from your selected light

Have the selected option’s drawing? Add its measurements below. If not, leave these fields blank and plan your space first.

Use the ceiling-to-lowest-point dimension from your selected option’s drawing, in the unit chosen above.

Which length should I enter?
Which length should I enter? Side-view example showing the canopy, suspension and light body. D is the complete distance from the ceiling mounting surface to the lowest point of the assembled light. Component boundaries vary by design. D SuspensionLight bodyCanopy

Enter D: the full distance from the ceiling mounting surface to the light’s lowest point—not just the cable, chain or light body.

Single-suspension measuring example, not this product. Use your selected option’s assembled drawing; multi-cable and ring designs differ. For a rod-mounted light, use the full installed height of the actual rod combination; do not assume continuous adjustment. Supplied cable or chain length is not necessarily its installed length.

Generic measuring example only; not this product, not to scale and not an installation drawing.

Optional: check stair opening space

Measure between the opening’s inside edges, allowing for projecting railings. Measure the light’s widest span in the same direction.

Stair opening — view from above A centred fixture inside a rectangular clear opening, seen from above. W spans the clear opening between its inside edges. F spans the dashed maximum fixture envelope along the same direction. The two side spaces marked g are equal only when centred. WFgg

Space on each side = (opening width − light width) ÷ 2

W: opening width. F: widest light width. g: space on each side when centred.

For a centred light only. Check the other direction and any obstacles separately; for an off-centre light, measure each side. This is not a safety clearance or fit approval.

See a quick calculation example

Calculation example only: A 120 in opening and a 30 in-wide light leave 45 in on each side if centred. If a confirmed selected-light width is available, Load example uses that width instead. This is not a safety check or product-fit verdict.

Generic measuring example only; not this product, not to scale and not an installation drawing.

Planning guidance only. Product dimensions and installation requirements need separate confirmation.

Ask about size & options

Specifications

Design & materials

Design & materials
Fixture formSpiral
MaterialsCrystal
Available finishesGold

Light source

Light source
Light sourceReplaceable Bulb
Number of lights3
Light colour optionsWarm White

Frequently asked questions

What should I measure before ordering this staircase chandelier?

Measure the clear width and depth of the stairwell or opening, plus the height from the ceiling to the lowest point you want the light to reach. Compare these with the selected option’s width, light body height and full hanging length. If your space is unusually high, narrow or complex, share the measurements with us before ordering.

Should this chandelier be professionally installed?

For a staircase or double-height space, we recommend professional installation. This is especially important for heavier lights or high ceilings. Before ordering, ask your installer to confirm the mounting position, ceiling support and safe access for fitting the light.

How should I plan for cleaning and maintenance in a high stairwell?

Think about cleaning before installation. In a high stairwell, a normal ladder may not reach safely, so you may need professional help. Follow the care instructions for the material, and always switch off the power before cleaning or replacing bulbs.

Related buying guides